2024 X-Yachts Xp 50

The Xp 50 is a high-performance luxury yacht, which offers impressive pace and ease of handling. The longer waterline length of this model allows additional cruising features to be incorporated, as well as increased straight-line speed.

Just like the Xp 44, this 50-footer utilises epoxy infusion build processes for improved stiffness with reduced weight, a carbon keel structure for maximum safety and ultimate stability, and a precision-moulded composite keel with iron fin and lead bulb giving a high ballast ratio.

Basic Boat Info

Make: X-Yachts
Model: Xp 50
Year: 2024
Condition: New
Category: Sail
Construction: Fiberglass


Length: 49'2 ft
Length Overall: 51'1 ft
Waterline Length: 43'8 ft
Beam: 14'6 ft
Max Draft: 9'10 ft
Min Draft: 7'9 ft
Displacement: 26,455 lb
Dry Weight: 29983 lb
Ballast: 10990 lb
Cabins Count: 3


Fuel Tank Capacity: 79 gal
Fuel Tank Material: aluminium
Water Tank Capacity: 145 gal
Water Tank Material: Stainless-steel


Heads Count: 2
Boat Class: Racers
More Info :
  • Built in sandwich construction with structural foam core
  • Bi-directional and uni directional E-glass strategically positioned for strength and weight optimization
  • Solid laminate in high stress areas in way of keel top, sail drive and rudder tube
  • Outer surface of hull in white sprayed Gelcoat (RAL 9010 white) with 3 waterlines in dark blue Gelcoat (RAL 5011 dark blue)
  • Hull epoxy infused in female moulds for optimum consolidation and high quality surface finish
  • Structural bulkheads in marine plywood varying in thickness from 16-20 mm laminated to hull
  • Structural hull liner bonded into hull. Carbon fiber reinforcements to absorb all loads from keel and mast
  • Single point lift attachment eye for easy and safe lifting and launching of the yacht - see extra for polyester strap and shackle.
  • Aft tender garage to accommodate inflatable tender (approx. 240x115x60 cm).
  • Transom door electrically operated
  • Bathing ladder in stainless steel mounted on transom door.
  • Hull recessed portlights - Rectangular (6 pcs)
  • Built in sandwich construction with structural foam
  • E-glass with bi and uni-directional cloth strategically positioned for strength
  • Outer surface of deck in white sprayed Gelcoat (RAL 9010 white)
  • Deck and locker lids moulded in female moulds for highest quality surface finish
  • Teak, vacuum applied, 9 mm nominal thickness on cockpit sole and seats
  • Variable height bulwark incorporated in deck/hull design providing safe toe rail forward and comfortable hiking aft
  • Anchor locker - drained area with windlass and space for anchor chain
  • Sail Cabin - aft of the anchor locker with space for general storage
  • Gas locker for 2 x 3 kg gas bottle located in side deck
  • Gas spring fitted to sail locker, forward and aft cockpit locker (4 pcs)
  • Halyard locker recessed into cockpit floor
  • Foot chocks - deck recessed aft of steering wheels
  • Cockpit floor locker with hinged lid, with space for optional cockpit table and liferaft storage below -Max size of liferaft 800 x 500 x 325
  • Xp 50 - Three cabin layout with heads situated in owners cabin and STBD aft
  • The interior will consist a combination of composite and wooden units.
  • Utilising First class craftmanship and lamination techniques
  • Pre-selected, top grade, T-teak veneer throughout yacht, hand polished and varnished to satin finish
  • T-teak veneered main bulkheads
  • White laminate bulkheads used inside bathrooms, on aft bulkhead and longitudinal bulkheads under cockpit floor
  • GRP deck head liner throughout with integrated light fittings. White vinyl panels on coachroof sides and deck head in the main cabin
  • Oceanair blinds incl flyscreen fitted to skylights (7 pcs)
  • GRP hull liner including heads floor and shower trays
  • Floorboards of 16 mm marine plywood with imitated teak and Gaboon plywood inlay stripes and inspection hatches to access bilge
  • Companionway (GRP moulding) with steps of curved unvarnished teak
  • Handrails by entrance and alongside coach roof portlights in main cabin in stainless steel

Owner's cabin

  • Large double berth . Marine plywood mattress supports . Mattresses in 15 cm comfort foam. Max size 200 x 180 cm
  • Seat with backrest cushion to port & starboard
  • Large double composite wardrobe (95 cm wide) with shelves and hangers on starboard.
  • Freeboard cupboards and shelves above berth
  • 2 Large drawers below owners berth for bedding
  • Freeboard lined with white vinyl covered panels

Main Cabin

  • To port: U-shaped 6 seater sofa (246 cm x 132cm) surrounding dining table
  • Two-seater settee bench in centre in veneer with a white kickback
  • To starboard: Sliding navigation table (75cm x 65 cm) with storage and navigationale stationary and instruments. Sliding navigator's seat with storage space for additional navigational and emergency equipment. The "sliding system" enables the navigator to face forward whilst sailing [sofa length with seat in aft position = 137 cm, sofa length with seat in forward position = 182 cm]
  • To starboard - Optional 3 cabin version with fixed forward facing nav station replacing starboard aft shower compartment: Sofa length of 190 cm, and drawers underneath chart table. All sofa front covered with T-teak veneer
  • T-teak veneer front panels on sofa fronts
  • Deep shelves behind the back rest including a set stainless steel book holders
  • Deep overhead lockers with bottom hinged openings running full length of saloon
  • Electrical switch board located above chart table on overhead lockers incl 230 V socket
  • Freeboard lined with white vinyl covered panels

Aft Cabins

  • Large double berths (205 cm x 150 cm, max width) Marine plywood mattress support with ventilation holes. Mattresses 120 mm comfort foam
  • Large double composite wardrobe (90cm wide) with shelves and hangers
  • Freeboard lined with vinyl

Head & Shower Compartments

  • Bulkheads covered with white laminate
  • Tabletops and integrated sinks in a white composite moulding
  • Mixer taps, single lever for sinks
  • Electrical shower pump with sensor for automatic operation
  • Unvarnished teak panels recess into shower and toilet floors
  • Towel rails and grab handles running around table tops in stainless steel
  • Towel hooks and toilet roll holders
  • Mirrors above sinks
  • Galley, High gloss white Composite moulding U-shaped (176 cm x 166cm)
  • Drawer unit with 5 drawers - top 4 drawers for cutlery and bottom drawer dedicated for tools
  • Sinks, rectangular recessed stainless steel with single lever mixing tap including 2 cutting boards
  • Cool box, GRP top opened 130 l with 100 mm insulation, built in Isotherm SP, accumulator plate sea water cooled Danfoss compressor
  • Gimballed Gas cooker - 3 burner Eno cooker with oven
  • Microwave oven with stainless steel front fitted in galley
  • White surface lower lockers provide storage space for crockery and food
  • T-teak veneer surface upper lockers for plates and food
  • 10mm hardened glass splash board
  • Waste bin mounted under sinks
  • Main engine, Yanmar 4JH4-TE 75 HP diesel with Sail-drive freshwater cooled.
  • Alternator charging capacity 110 A @ 12V
  • Special engine compartment with sound insulation ensures low noise level in yacht
  • Engine easily accessible for service at the forward end, through companionway steps; and side via the aft cabins
  • Folding propeller, 2-bladed bronze for S-drive
  • Engine control panel and throttle/gear lever placed in starboard cockpit coaming.
  • Engine control panel incorporates rpm meter, hour counter, acoustic alarm for oil pressure and cooling water temperature
  • Fuel tank 300 ltr. in aluminium, with VDO analogue level gauge, mounted under floor board, filter with water separator and shut-off valve and stainless steel deck fill
  • 12 V DC system throughout yacht
  • X-Yachts main switch board with 27 automatic fuses and 3 analogue VDO meters for fuel, water and battery voltage and 1 x 230 V socket and 1 x 12 V socket mounted at nav station
  • 12 V DC system for main engine installation
  • All cabling terminates in “dry” GRP box fitted behind main electrical panel for added safety
  • AGM batteries 4 batteres as standard each 110 Amp hours (4 x110 Ah)
  • Separate engine spiral-cell battery (55 Ah, 12 V) mounted near main engine for starting of engine and optional generator only. Engine battery is charged by either main engine or generator
  • Shore power installation with shore power inlet mounted in cockpit protected by 10A main fuse. 230V AC distribution box located starboard aft cabin with integrated ground fault circuit breaker/10A fuse, 1 x 230 V AC socket and switches for hot water immersion heater and battery charger
  • Three stage battery charger 12V/80A, mounted
  • 1 x 230 V and 1 x 12 V socket at main switch board
  • 12 V halogen lights fitted for general purpose below deck throughout cabins
  • General lights and dome spotlights integrated in inner liner
  • Light in engine room for better service access
  • Reading lights throughout aft cabin, main cabin and owners cabin (No: 8)
Mast and Rigging
  • Fractional tripple spreader keel stepped mast, tapered silver anodized aluminium, specially designed for Xp 50
  • Steaming light LED, Windex with light, tube for additional electrical equipment and 2 mast steps fitted
  • Silver anodized boom with single line reefing and internal boom outhaul, telescopic vang and outer purchase block system

Standing Rigging

  • Standard Backstay: Split backstay fitted with integral backstay adjuster on stbd side only
  • Chain plates in stainless steel fitted to bullwalk/on top of hull (2 pcs)
  • Discontinuous stainless steel rod rigging with rod turnbuckles
  • Rod forestay with furling drum under deck
  • Chain plates in stainless steel for forestay and split backstay (3 pcs)

Running Rigging (Spectra sheets and polyester control and reefing lines:)

  • Spectra halyards led back to cockpit for easy handling:
  • Main halyard 12 mm
  • Genoa halyard 12 mm
  • Mast head spinnaker halyard 12 mm
  • Furling control line 8 mm
  • Outhaul 8 mm
  • Vang control line 8 mm
  • Reef 1 10 mm
  • Reef 2 10 mm
  • Cunningham at mast wth block and cleat system - 8mm
  • Mainsheet 10 mm
  • Genoa Sheet 10 mm
  • 1 x Flag pole, teak with bronze bushing
  • 1 x 25 m shore power cable
  • 1 x 3 kg gas bottle
  • 4 x Fire extinguishers, dry powder of 2 kg each, fitted throughout the yacht and
  • 1 x fire blanket
  • 4 x Fenders, white air-filled with lanyards and X-Yachts logo
  • 2 x Mooring ropes, polyester 20 m x 14 mm

Contact Us

More From X-Yachts

2024 X-Yachts X4⁹ MkII
2024 X-Yachts X-Power 33C
2024 X-Yachts X4⁶
2024 X-Yachts X4³