Overview

1987 Frers 30

Built by Carrol Marine

Designed by German Frers

Great dual purpose racer/cruiser that has been well maintained by very knowledgeable owner. If you like to do a little Racing along with just great sailing this one's for you.

Recent Upgrades & Service & Modifications to name a few:

Competition Composites Rudder and new Bearing
New Chain plates & Stemhead fitting
New Standing rigging
Bottom Job w/ Petit Vivid Paint (10/2024)
Keel bolts nuts removed/inspected & re-torqued to spec.
Deck Stripped of all hardware & Fresh Paint Topside
Deck was fully inspected for moisture & re-cored where needed
Fresh topside paint with Epifanes two part
interior Varnish was stripped & 8 Coats re-applied
Flex-a-Fold 2 Blade prop
Shaft, cutlas bearings, stuffing box & Coupler
New Sail Technologies Radial main w/ Tides Track
New Fuel Tank
New Battery Charger
Motor Mounts Replaced
Stainless Exhaust Mixer
Winches disassembled/Cleaned/greased
Spinlock Rope Clutches
LED Lights throughout (Cabin & Running Lights)
Boom Cover
Standard Horizon VHF
New Portlights, Portholes & one new Hatch
Main sheet & Vang blocks

All The bugs have been worked out of the boat and has participated in the local racing season 2024-2025.

Sellers Dream boat came on the market and could not pass her up. This is a great boat and all major lifting/systems have been addressed. Add some electronics & she is ready to get you to the finish line this season.

Contact us today for additional details, to schedule you personal showing or video walkthrough.

Sea Lake Yachts is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Professional Yacht Sales. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel

Specifications

Dimensions

Length Overall29' 5"

Beam10' 10"

Draft5' 9"

Details

Year1987

ManufacturerFrers

Model30

CategoryCruiser-Racer, Racing Sailboat

TypeSail

Hull MaterialFiberglass

Performance

Fuel TypeDiesel

Cruise Speed6.83 Knots

Weight

Displacement6,900 lbs

Tank Capacities

Fuel12 gal

Fresh Water30 gal

Holding10 gal

Registration

HIN/IMOabc

Full Details

From Sailboat Lab

The Frers 30 is a 29.5ft masthead sloop designed by German Frers and built in fiberglass by Carroll Marine since 1987.

The Frers 30 is a light sailboat which is a high performer. It is stable / stiff and has a low righting capability if capsized. It is best suited as a racing boat. The fuel capacity is originally very small. There is a very short water supply range.

Main features:

Model Frers 30

Length 29.50 ft

Beam 10.92 ft

Draft 5.75 ft

Ratios

Sail area / displ. 20.28

Ballast / displ. 37.68 %

Displ. / length 175.26

Comfort ratio 16.33

Capsize 2.30

Hull

Hull type Monohull fin keel with spade rudder

Construction Fiberglass

Waterline length 26 ft

Maximum draft 5.75 ft

Displacement 6900 lbs

Ballast 2600 lbs

Hull speed 6.83 knots

Rigging

Rigging Masthead Sloop

Sail area (100%) 458 sq.ft

Air draft ?

Sail area fore 246.03 sq.ft

Sail area main 212.40 sq.ft

I 41.70 ft

J 11.80 ft

P 36 ft

E 11.80 ft

From HarborMoor

If you are a boat enthusiast looking to get more information on specs, built, make, etc. of different boats, then here is a complete review of FRERS 30. Built by Carroll Marine and designed by German Frers, the boat was first built in 1987. It has a hull type of Fin w/spade rudder and LOA is 29' 5".

Its sail area/displacement ratio 20.28. Its auxiliary power tank, manufactured by Yanmar, runs on Diesel.

FRERS 30 has retained its value as a result of superior building, a solid reputation, and a devoted owner base. Read on to find out more about FRERS 30 and decide if it is a fit for your boating needs.

Listing MLS by Yachtr.com